Saturday 19 December 2015

Diagnosis holds the key to 'problem-solving' in cotton cultivation

Article published in Souvenir of the ICAC 74th Plenary meeting held at JW Marriot Mumbai 6-11 December 2015.

Diagnosis holds the key to ‘problem-solving’ in cotton cultivation

K. R. Kranthi
ICAR-Central Institute for Cotton Research, Nagpur


Cotton –‘the white gold’ is one of the few commodity crops that have immense potential to bring sustained prosperity to farmers, traders and Nations. Farmers prefer cultivating cotton over several other crops, especially under rain-fed conditions. But, year after year, problems keep cropping up in any of the 80+ cotton growing countries. A long list of dynamic, unending woes, describes the predicament of the cotton farmers in India and all across the globe. Most of the times unpredictable rains, truant-weather, insects, diseases, costly inputs and non-remunerative market, grab headlines.

Whenever problems crop up intermittently, the general tendency is to find immediate short term remedies. For example, when mealy bugs appeared in damaging proportions on cotton in India during 2004-2007, there was an immediate demand for insecticides that could kill the insects. Any suggestion other than insecticides was scoffed at. History is replete with such innumerable examples. But, the use of insecticides in many cases led to the resurgence of the same species or resulted in the outbreak of some other insects, most of which would have been insignificant otherwise. Insecticide induced side-effects on ecosystems are not at all uncommon. But, these are rarely noticed by non-experts. From a technical perspective, it is important to reconsider the current ‘curative’ approach, in the interest of sustainability. Ideally, a proper diagnosis of the root cause of a malady would help in the development of strategies that can prevent the malady itself. This article is an attempt to propose such approaches to find a path towards sustainable cotton production in India.

ISSUES, NATURAL FACTORS, DIAGNOSIS AND SOLUTIONS

ISSUES:

1.     LOW YIELD: Cotton yields of 500-550 kg lint per hectare place India at 32-33rd rank in the world. The average global yield excluding India is 904 Kg lint per hectare. It is a matter of concern that the yields of irrigated cotton in India are 1.5-2 fold less than the yields in rain-fed conditions of many other countries.

2.     CHEMICALS FOR BIOTIC STRESS MANAGEMENT: The number of insecticide applications on cotton per season is amongst the highest in the world. Insect resistance to insecticides is highest in India. Insecticide usage on cotton is probable the most intensive and extensive in India compared to many major cotton growing countries across the globe.

Insects: Cotton crop is generally believed to be a haven of insects. Over the past 40 years, the crop in India suffered the most due to insect attacks. A range of insects such as aphids, jassids, whiteflies, mealy bugs, thrips, armyworms, hairy caterpillars, semi-loopers, Spodoptera, American bollworm, pink bollworm, spotted bollworm etc have been ravaging cotton time and again.

Diseases: Though there are a few diseases that are problematic in cotton, the cotton leaf curl virus is most dreaded, because like many viral diseases it cannot be cured. The disease is confined to north India and Pakistan.

Weeds: Cotton crop is most adversely affected due to weeds during the first 60-70 days of the crop. Therefore it is important that the crop is kept free of weeds during this period.

3.     BOLLWORM RESISTANCE TO BT COTTON: Bollworms are adapting to Bt-cotton. The damage by ‘BG-II resistant’ pink bollworms in Gujarat was significant in 2014 and 2015 and is expected to continue in the years to come.

4.     HIGH FERTILIZER USAGE: Fertilizer usage on cotton is amongst the highest in the world. The crop is responding less to fertilizer usage due to declining soil health.

5.     RISING COSTS & DECLINING PROFIT MARGINS: Data from the Ministry of Agriculture show that over the past 10 years, from 2002 to 2012, the cost of cultivation increased 3-fold. Seed cost increased 3.7-fold, labour cost increased 4.2-fold, fertilizer cost per hectare increased 4.6-fold and insecticide costs per hectare doubled over the past 5 years. The net profit plummeted to Rs 1758 per hectare, which is almost equivalent to the general range of profits obtained prior to 2004.

6.     FIBRE QUALITY: In recent times, over the past 10 years, there has been a significant improvement in fibre quality in India. However, issues with declining micronaire and variable length and reduction in strength in second and subsequent pickings, are causing concerns. 

7.     WATER & SOIL:

Water: Like for any crop, water is critical for cotton. But, cotton is basically a xerophytic crop. Xerophytic plants are those that can survive with less water. Kozlowski – 2012 in his book ‘Additional Woody Plants’ writes that ‘Cotton plants (Gossypium) are tropical and subtropical xerophytic, perennial shrubs.’ Cotton crop needs about 1000 mm water in its cycle. The requirement during early vegetative stage is only 10-15% of the total water requirement of about 1000 mm for the crop. The crop needs 50-60% of the water requirement during flowering period and rest of the water during boll formation stage.

Soil: Medium and heavy textures soils are suitable for cotton cultivation. But, contrary to this common belief, the crop is also cultivated in light soils to obtain high yields. Deep soils with good water holding capacity provide water and nutrients to the crop during flowering and boll formation stage. The crop requires 0.5 to 1.0 kg/ha Nitrogen per day during vegetative phase and 3-4 Kg/ha Nitrogen per day during flowering and boll formation stage.

8.     MISMATCH OF WEATHER AND ‘CROP-NEEDS’: Despite the prevalence of ideal weather conditions for cotton in India, the crop suffers because of the long duration of 180-240 days. The 80-90 day window of flowering and 100-140 day window of boll formation get caught in a range of unsuitable weather conditions that lowers the yields significantly. As mentioned above, the flowering and boll formation window also suffers water and nutrient stress.


Weather: Compared to many major cotton growing countries, Indian weather is best suited for cotton. The preferred temperature range for flowering and boll formation is 27 to 32oC with day temperatures higher than 20oC and night temperatures higher than 12oC. Many varieties and hybrids actually perform best under short-day conditions. 


 DIAGNOSIS

1.    Low yields: Indian yields are low because of low plant density of 11,000 to 16,000 plants per hectare as compared to 111,000 to 222,000 plants per hectare in major cotton growing countries such as China, USA, Brazil, Mexico and Australia. Because of low plant density, each plant is expected to produce a large number of bolls per plant, which takes a longer duration. The long duration extends the flowering and boll formation into a staggered phase which coincides with the late season when moisture and nutrients are not deficient.

2.    Water stress and nutrient deficiency during flowering and boll formation is responsible for low yields. Cotton crop in India is of long duration. Flowering starts during the end of monsoon and continues for about 80-90 days after the cessation of monsoon. Under rain-fed conditions in India the crop suffers severe water stress and nutrient deficiency specifically at the flowering and boll formation stage, thereby resulting in low yields.

For example, Maharashtra and Telangana together cultivate 5.7 million hectares, thus accounting for half of India’s cotton area. More than 90% of the area in the two states is under rain-fed conditions. Normal monsoon in the major cotton growing areas of Maharashtra and Telangana starts in June and recedes by early September. Peak flowering and boll formation windows start after September. The crop suffers severe moisture, nutrient and weather stress during flowering and boll formation stage this resulting in low yields. The yields are lowest in the two states thus lowering down the average yields of India.

3.     Acute insect pest damage is because of the long duration of 180-240 day crop. The long 80-90 days flowering window and 100-140 days window of boll formation in India leads to continuous influx of insects. In all the major cotton growing countries, the crop is of short duration at 150-160 days and in any case would be terminated before 180 days. Since the crop is under high density each plant is expected to produce only 7-10 bolls per plant, the flowering window is about 20-30 days and has less problem with the American boll worms making it easier for pest management. Pink bollworm is a late season pest and occurs mainly on the crop after the 180 day duration. Thus short duration crops escape the pink bollworm because they are harvested before the occurrence of the pest.

4.     Late sown crop is more vulnerable to the whiteflies, jassids, mealybugs thrips, boll worms and CLCuD. Yields are low under late in late sown crop because all the tender stages of the crop coincide with the peak infestation of insect pests.

5.     Human interventions cause insect pests and diseases. Long duration hybrids need more nutrients and water. Excessive application of water and nutrients especially urea leads to more foliage and attracts sucking pests. Sucking pests necessitate application the recommended groups of insecticides such as ‘organophosphate’ and ‘neonicotinoid’ insecticides. Application of these insecticides lead to staggered flowering and delayed maturity, thus leading to more insects and more insecticide usage. It is an established fact that the whiteflies, aphids and American bollworm problems were because of a combination of factors such as long duration American cotton hybrids + repeated application of synthetic pyrethroids. Apart from these indiscriminate use of insecticides causes pest resurgence, resistance,  residues and ecological disruption apart from the toxicity to non-target organisms.


Mono-cropping aggravates insect pests, diseases and causes nutrient deficiencies. Cotton as a sole crop year after year in the same land leads to insect pest and diseases. In many parts of India cotton is cultivated round the year from June to May. Insect pests such as mealy bugs and pink bollworms thrive in repeated cycles and cause havoc to cotton sown in the region.

SOLUTIONS:

1.     Cotton varieties
a.     Short duration of 150 days
b.     Compact short statured -suitable for high density
c.     Resistance to sap-sucking pests and CLCuD

2.     Early or timely sowing, especially in rain-fed regions

3.     Avoidance of excessive urea, organophosphates and neonicotinoid insecticides

4.     Integrated pest management and insecticide resistance management tools for efficient pest management would help in reducing chemical inputs.

5.     Intercropping with legume crops such as soybean, greengram, blackgram or cowpea for nitrogen fixation and IPM (integrated pest management)

6.     Desi species Gossypium arboreum and Gossypium herbaceum are robust and are ideally suited for tough conditions with low inputs. Short duration Desi varieties under high density planting can provide high yields with low inputs in rainfed farming.

7.     Short duration varieties sown in time with onset of monsoon, under high density planting will be able to get proper soil moisture and nutrients. Such varieties will have a narrow flowering window of 20-30 days that would possibly enable the crop to escape the American bollworms. Soil moisture would also be available adequately during the short flowering and boll formation window for the 7-9 developing bolls per plant. With available soil moisture, the plants are able to absorb available nutrients. Under high density planting of 1.6 to 2.0 lakh plants per hectare, 7-9 bolls per plant result in high yields in a short time. Weather conditions of 27 to 32 oC with day temperatures higher than 20oC and night temperatures higher than 12oC are prevalent during the monsoon and the immediate period after cessation of monsoon, which coincides with the 20-30 day flowering and 60-90 day boll formation phase. Boll bursting is synchronous in high density planting. With the availability of adequate soil moisture and nutrients the fibre quality is uniform and good. Intercropping with short duration legumes provides adequate nitrogen exactly at the flowering and boll formation stage. Legume intercropping provides a wide range of beneficial natural enemies that assist in IPM, thereby reducing the need for insecticides. Cultivation of legume intercrops in between rows in high density systems or in crop rotation reduces the need for repeated weeding and can assist in conservation agriculture.

QUESTIONS AND ANSWERS

1.    Why are the yields low in India? Can the yields be enhanced form the current Indian average of 500 kg/ha to the world average (excluding India) of 904 kg/ha?

Yields are low in India because of low plant density and long duration. High yields can be obtained through short duration varieties planted in high density.

2.   Why are the insect pest problems so acute on cotton in India unlike in other countries?

Insect pest problems are very acute in India because of the long duration of the crop and the long flowering and boll formation window.

3.   Why did the Indian farmer resort to highest number of insecticide applications prior to Bt-cotton and now despite Bt-cotton?

Excessive application of urea in hybrids leads to luxuriant vegetation and a long flowering window which attract insects over a long period of time. The continuous stream of insects on the long duration hybrids necessitates insecticide applications that disrupt ecosystems and lead to the need for repeated insecticide applications. Insecticides were used mostly for bollworm control prior to Bt-cotton. The area under hybrids increased from 38% in 2002 to 95% in 2012. Because of long duration, the hybrids are more vulnerable to a wide range of insects. While bollworms were being effectively controlled by Bt, sap-sucking insects needed insecticide applications. Thus far more than 1600 Bt-hybrids have been approved in India. Most of these are susceptible to sap-sucking insects. Thus farmers have been using insecticides on sucking pests now and also against the pink bollworm which developed resistance to Bt-cotton in some parts of the country.

4.   Are insecticides and GM (genetic modification) the only reliable technologies for insect pest management? Without the use of chemicals or (GM) technologies, is it possible to prevent insects from causing economic damage?

Many countries circumvent the need for chemicals and GM crops by using short duration cotton varieties. Turkey and Uzbekistan are good examples.

5.   Why did the fertilizer usage increase so significantly in recent years?

Cotton crop is not responding positively to chemical fertilizers due to deterioration in soil health and the poor organic carbon content.



Chemical fertilizer usage increased with the increase of Bt cotton hybrid area.

6.   Without irrigation, is it possible to ensure that the crop gets adequate water during the crucial stage of flowering and boll formation stage?

Short duration crop with early maturity has flowering and boll formation stages that are adequately covered by the monsoon regimen. Therefore there would be no separate need to irrigate the crop at the crucial stage.

7.   Without fertilizer application, is it possible to ensure that the crop gets adequate nitrogen during flowering and boll formation stage?

Legume intercrops, FYM, vermi-compost and bio-fertilizer application can provide the short duration varieties adequate amount of nutrients for a healthy crop and high yields. There may be less need for chemical fertilizers with improvement in soil health due to the intercrops and reduction in the use of chemical application.

8.   Is it possible to ensure that the crop gets the desirable weather conditions during flowering and boll formation?

Early sowing of short duration cotton in half of India’s rainfed cotton which is in the two states of Maharashtra and Telangana, helps in creating a match between desirable weather and flowering and boll formation

9.    Without herbicide usage, which are the other technologies to prevent weed damage?

Intercrops, high density and conservation agriculture can help in minimizing weeds.

10. Can we prevent the CLCuD (Cotton leaf curl virus disease) in north India with simple strategies?

The best solution to the CLCuD is early sowing in April with varieties tolerant to whiteflies and the CLCuD. Desi cotton varieties are immune to the CLCuD and highly tolerant to whiteflies.


CONCLUSION


Simple solutions can provide major relief. Short duration cotton varieties sown early in high density with legumes either as intercrops or in crop rotation in high density planting systems can help in IPM, escape almost all insect pests and obtain water and legume-fixed-nitrogen during the critical flowering and boll formation window. Thus high yields can be obtained from low input agriculture.

Pink Bollworm Strikes Bt-Cotton


This article was published as 

Kranthi K.R. 2015. Pink Bollworm Strikes Bt-cotton. CAI-Vol 35: 1st December 2015. Cotton Statistics and News, Published by Cotton Association of India, Mumbai

Pink Bollworm Strikes Bt-cotton
K. R. Kranthi

The pink bollworm is back with a vengeance. This insect was a serious concern on cotton in India about 30 years ago. There were very few reports of any major damage by pink bollworm to cotton since 1982 in the country. But all that has changed now. This year, severe damage to bolls by pink bollworm and yield-losses were observed in Bt-cotton many regions of Gujarat and some parts of AP, Telangana and Maharashtra. More concerning is the fact that the worm is happily chewing up Bollgard-II-Bt-cotton which contains two genes (cry1Ac+cry2Ab) that were supposed to be highly effective in controlling the pest. Studies conducted by ICAR-CICR (Central Institute for Cotton Research, Nagpur) over the past two years clearly showed that the pink bollworm developed resistance to two Cry toxins deployed in Bollgard-II. It is important to unravel the mystery as to why the worm returned back after 30 years to trouble cotton again. And that too, with a vengeance to break a technology called Bollgard-II that was supposed to be all powerful.

Cotton stalks stacked near fields in Gujarat. Photo: Kranthi

PBW larva (Photo: Kranthi)

Rosette Flower (Photo: Kranthi)


I was in Gujarat last week with a team of three senior colleagues of ICAR-CICR. Dr Sandhya Kranthi, Head Crop Improvement Dr A. H. Prakash, Project co-ordinator and Head of our regional station Coimbatore and Dr Venugopalan, Head of the PME unit were part of the team. We toured across Ahmedabad, Surendranagar, Rajkot, Junagarh, Amreli and Bhavnagar. Our visit was a follow up of the concern expressed by a previous expert team visit to Gujarat. My colleague Dr Chinna Babu Naik and his team had visited Gujarat in the first week of November to assess pink boll worm infestation on Bollgard-II. Dr Naik was categorical when he declared that ‘this season the pink bollworm has spread across Gujarat mostly in green bolls for second picking that are affected seriously in Junagarh, amreli, Bhavnagar and Bharuch’.

A woman farmer in Bhavnagar plucked a few green bolls randomly from a plant and pulled out a sickle to open them. She said something angrily in Gujarati, not a single word that I knew, but clearly understood what she conveyed. The interpreter confirmed that she said ‘Look, every green boll has this red coloured insect inside, fully grown and feeding on developing seeds’. Another farmer remarked ‘Bollgard-II is no longer effective on pink bollworm. We are using insecticides to control it’. The farmer echoed the feeling of many farmers in Gujarat who are just beginning to experience the failure of Bollgard-II to control the pink bollworm. The damage was more especially in the green bolls for second and subsequent pickings. Our approximate estimates indicate that Gujarat may have lost 7-8% of its cotton to the pink bollworm this year. More concerning is the fact that the farmer would get a lower price for the second and third picked cotton because of the poor quality. At a time when the market prices are low, this could compound the stress.

I remember my visit to Gujarat in November last year. It was clear that not many farmers were aware of the damage that the pink bollworm was causing to green bolls of Bollgard-II. This year, there was a huge difference. Farmers were not only aware of the impending problem of pink bollworm, but many also knew precisely how to manage it. Our personal interaction with farmers across Saurashtra this year in mid November, clearly mirrored the enormous efforts that were made by the Government departments and private agencies. These efforts clearly showcase a success story of how combined efforts from a central research institute ICAR-CICR, the Junagarh Agricultural University (JAU), the State Agricultural Department, the Central Ministry, the seed industry, (Krishi Vigyan Kendra) KVKs and NGOs to educate farmers on pest management could help farmers to efficiently manage insect pests to minimize yield losses. It was heartening to note that the weekly advisories issued by CICR on the institute’s web site formed the core essence of the management strategies all across the state. It was also clear that wherever the recommendations were followed, the fields had very less infestation at negligible levels in the first picked cotton and as less as 5-10% in the green bolls for second picking. Interestingly, about 60-70% of the farmers whom we met had followed the recommendations.

Surveys conducted by ICAR-CICR showed that pink bollworms were also surviving on Bollgard-II not only in Gujarat but also in parts of AP, Telangana and Maharashtra. Though the following passages describe the situation with focus in Gujarat, the problem seems to be engulfing regions in other states especially where cotton crop is being extended beyond 180 days, sometimes extending it all through the year.

CICR team survey (Photo: Kranthi)

PBW pupa on freshly picked cotton (Photo: Kranthi)

PBW pupa on cotton at market yard (Photo: Kranthi)


PINK BOLLWORM
Pink bollworm, Pectinophora gossypiella (Saunders) is presumed to have an Indo-Pak origin. The larvae feed only on a few crops such as cotton, bhendi (okra), Hibiscus, and jute. Eggs are laid on flowers, young bolls, axils of petioles and underside of young leaves. After hatching, the young larvae penetrate ovaries of flowers or young bolls within two days of hatching. Larvae turn pink in colour in 3-4 days after hatching. The degree of pink depends on the food that the larvae eat. Dark pink results from eating maturing seeds. Moths are dirty brown in colour about 5 mm in length. Larvae prefer feeding on developing seeds and generally pupate inside the seeds and bolls. Affected bolls either open prematurely or get badly affected due to rotting. Fibre qualities such as length and strength are lowered. Further the cotton lint in the insect infested bolls gets damaged by secondary fungal infection. The seed-cotton carried to market yards acts as a source for the pest to spread. Pink bollworm generally arrives with the onset of winter and continues to survive on the crop as long as flowers and bolls are available. Long duration cotton allows the pest to thrive for a longer continued period in multiple cycles thereby affecting the subsequent cotton crop. In the absence of cotton, or as a genetically pre-disposed condition, the pink bollworm undergoes hibernation or diapause that allows it to be dormant for 6-8 months, until the next season.

SYMPTOMS
Stained lint in open bolls: This is a distinct symptom of damage. It occurs in the later stages of crop growth, once the damage is done. 
Pheromone moth trap catches:  Pheromones are scents that are released generally by female insects to attract male insects. These scents are synthesized artificially and used in traps to monitor the onset and levels of infestation. Pheromones at higher dosages or frequency of lures can also be used in mass trapping and to confuse mating. A good correlation has been obtained between the pheromone trap catches and larval incidence in the field.
Rosette flowers: Flowers do not open fully. They get twisted.
Spots on green bolls: black spots on a green boll may often be indicative of pink bollworm damage. Pink bollworm damaged bolls often predispose the occurrence of secondary bacterial infection that results in the blackening of boll rind on the outside.
Exit holes on green bolls: A small hole of 1.5 to 2 mm diameter clearly indicates the exit of the insect from the boll.

COTTON IN GUJARAT
The total cotton area in Gujarat is about 26 to 30 lakh hectares. This year, cotton was sown in 27.58 lakh hectares in the state, including 5.5 lakh hectares under Desi cotton, Gossypium herbaceum. The major cotton growing districts are concentrated in Saurashtra, followed by central Gujarat and north Gujarat. Saurashtra has about 18.5 lakh hectares in Surendranagar (4.8 lakh ha), Amreli (3.9 lakh ha), Rajkot (3.8 lakh ha), Bhavnagar (3.0 lakh ha), Jamnagar (2.3 lakh ha) and Junagarh (0.7 lakh ha). Cotton in central Gujarat is cultivated in about 7.0 lakh hectares in Ahmedabad (2.2 lakh ha), Vadodara (2.0 lakh ha), Bharuch (1.3 lakh ha), Narmada (0.5), Gandhinagar (0.4 lakh ha) and Kheda (0.4 lakh ha). In north Gujarat, cotton is cultivated in about 3.4 lakh ha in Sabarkantha (1.6 lakh ha), Patan (0.7 lakh ha), Mehsana (0.6 lakh ha) and Banaskantha (0.5 lakh ha).

About 5.5 to 7.0 lakh hectares are under Desi (Gossypium herbaceum) commonly called as Wagad cotton, grown mainly in Kutch, Rajkot, Surendranagar, Ahmedabad, Mehsana, Patan and Banaskantha. Except the wagad cotton, all other cotton is under Bollgard, with 85% of BG-II and rest under BG. Some parts of Gujarat also have illegal versions of Bt cotton, estimated to be less than 0.5 lakh hectares.

PINK BOLLWORM REPORTS IN GUJARAT
2009-2010: In January 2010, Monsanto reported the survival of Pink bollworm larvae in Bollgard (Cry1Ac) and not in Bollgard-II (Cry1Ac + Cry2Ab) in Saurashtra region. Studies conducted by CICR on the performance of first generation Bt cotton against pink bollworm showed that there was a slightly higher level of pink bollworm infestation on Bt cotton specifically only in Saurashtra region. However the infestation levels were found to be more only in the late stage of the crop and there have been no reports or complaints from farmers about any possible yield loss. A scientific analysis on the reasons for the higher incidence showed that the unusual survival of the pink bollworm in Saurashtra was due to weather conditions that favoured the pest survival and also due to the fact that many farmers in Saurashtra continue to keep the cotton crop in fields for 2-3 extra months with extra irrigation for 1-2 more pickings until the end of March, which favours the multiplication of pink bollworms for the next season. The data (www.cicr.org.in AICCIP, All India Coordinated Cotton Improvement Project reports 2009-10) showed that during 2009, there was indeed unusually high level of pink bollworm moth catches in the pheromone traps installed in Junagarh of Saurashtra region. Thus high infestation levels were responsible for the damage and resistance if any may have also been a contributing factor.

2012-2014: Surveys conducted by CICR showed that pink bollworm larval survival on BG-II was recorded significantly higher in 2012, 2013 and 2014 mainly in Amreli and Bhavnagar districts in Saurashtra. However, larval survival on BG-II was also reported from several other districts of Saurashtra and central Gujarat in November-December of 2014. Farmer complaints were received from Amreli in September 2014 and from Baroda and Bharuch in October 2014.
CICR deputed a team of scientists regularly every year. Samples of healthy and damaged bolls and surviving pink bollworm larvae were collected by CICR regularly for resistance monitoring and to ascertain the trait purity in the boll samples. Studies in 2014 clearly established that pink bollworm larvae were able to survive inside bolls of authentic BG-II hybrids. About 40-80% of the bolls harboured surviving larvae. Resistance monitoring results unequivocally showed that pink bollworms developed resistance to Cry1Ac, Cry2Ab and Cry1Ac+Cry2Ab in Amreli and Bhavnagar districts.

2015: Reports of pink bollworm damage in BG-II were received in July 2015. Farmers complained of pink bollworm in Amreli, Dhari, Jambusar in Bharuch, Karjan, Shinor-padara and Daboi of Vadodara during July 2015. Pink bollworm damage was reported from Garaidar Taluka of Bhavnagar in August 2015.
CICR deputed a team of scientists to survey the regions and collect samples for analysis. The team reported extensive occurrence of rosette flower symptoms that are caused due to pink bollworm damage. The damage ranged between 0-80% on Bollgard II at Bharuch, Vadodara, Anand, Bhavnagar, Amreli, Junagadh, Rajkot, Surendranagar and Ahmedabad districts.  Damage ranged between 11.0 to 67.0 % in Amreli on BGII. Occurrence of pink bollworm, so early in the cotton crop of Bollgard II was unusual, but not unexpected.

REASONS FOR PINK BOLLWORM OCCURRENCE ON BOLLGARD-II
a)    Cultivation of long duration hybrids that serve as continuous hosts of the pink bollworm.

b)    Large number of hybrids with varying flowering and fruiting periods that, provide continuous food for the bollworms in an overlapping manner.

c)    Long term storage of raw cotton in ginning mills and market yards that serve as a source of pink bollworms to the ensuing crop.

d)    Early (April-May) sown crop started flowering that coincided with the minor seasonal peak pink bollworm that occurs in June-July.

e)    Pink boll worm populations from Gujarat developed resistance to Cry1Ac and Cry2Ab together. Therefore the larvae are able to survive on BG-II.

f)     Squares, flowers and developing seeds in young bolls have less Bt-toxin expression.

g)    The segregating seeds in bolls of F-1 hybrid plants accelerate resistance development. India is the only country in the world that cultivates Bt cotton as hybrids. F1 plants harbouring the F1 bolls carry seeds that segregate in the ratio of 9:3:3:1 (Cry1Ac+Cry2Ab in 9; Cry2Ab alone in 3; Cry1Ac in 3 and none in 1). Thus a spectrum of non Bt seeds, seeds with Cry1Ac alone, seeds with Cry2Ab alone and seeds with Cry1Ac+Cry2Ab are present in a single boll. This situation is ideal for resistance development, due to selection of resistance to independent toxins.

h)    Extending the crop beyond November, in many fields extended up to April-May provided continuous availability of cotton all through the year. Over the period 2009-2014, cotton prices were high and farmers extended the crop in about 11.0 lakh hectares of irrigated cotton fields in Rajkot, Surendranagar, Amreli, Bhavnagar and Jamnagar. Pink bollworm is a winter pest. It causes damage mainly in November, which can be prevented. The pupae enter into diapause in December in the absence of cotton crop or crop residues such as stalks. However, if the crop is available beyond November, the pest continues to survive on the fruiting parts. This extended phase intensified Bt-toxin selection pressure and resistance development was accelerated.

i)      The crop was sown early under drip irrigation in many parts of Saurashtra. The early sown crop together with the extended crop of the previous season provided a continuous crop for the pink bollworm all through the year and facilitated multiplication of the pest with overlapping generations, intensive selection pressure, thus accelerating resistance development.

j)      Non-compliance of refugia non-Bt cotton.

k)    Lack of timely and appropriate management initiatives, which led to continuous proliferation of the insect pest. Farmers do not initiate ant control measures against any bollworms on Bt-cotton.

l)      Surveys conducted by CICR in Saurashtra revealed that a combination of monocrotophos + acephate was sprayed 3-4 times on Bt-cotton by majority of farmers in Junagarh, Amreli and Bhavnagar. Monocrotophos + acephate during early stages of the crop induces growth of fresh green leaves, switches back the crop from reproductive to vegetative phase and delays maturity of the crop. Repeated spraying (3-4 times) of this combination results in staggered flowering and fruiting. Since flowers attract bollworms, there was a continuous influx of the pink bollworm in cotton fields due to continuous staggered flowering, especially wherever moncrotophos + acephate was repeatedly sprayed. Infestation of pink bollworm was high in the open bolls and green bolls of second picking in such fields. Wherever farmers had sprayed synthetic pyrethroids in late October or early November, pink bollworm infestation was negligible. In fields that were not repeatedly sprayed with monocrotophos + acephate, boll bursting was synchronous and pink bollworm was less.

MANAGEMENT STRATEGIES
The following strategies were developed by ICAR-CICR to ensure that Bt cotton continues to be effective for the longest possible time.

a)    Regular monitoring of bollworm resistance to Bt cotton including Bollgard-II.
b)    Use of the parasitoid Trichogramma bactriae in Bt cotton fields for pink bollworm  management.
c)    Refugia: Recommend planting of desi cotton/conventional non-Bt G. hirsutum cotton and late planted bhendi as refugia crops.
d)    Timely termination of the crop latest by December and avoiding ratoon and/or extended crop.
e)    Utilization or destruction of crop residues and cotton stalks immediately after harvest.
f)      Crop rotation is strongly recommended to break the pest cycle.
g)    Short duration single-pick varieties (150 days) provide high yields in high density and escape the pink bollworm.
h)    Installation of light traps and pheromone traps in fields during the season and also near go-downs, ginning mills, market yards etc., to trap post season moths.
i)      Mass trapping and mating disruption using pheromone traps.
j)      Use of ‘pheromone traps’ and ‘green boll dissection’ for regular monitoring and initiate control interventions based on economic threshold levels of 8 moths per trap per night and/or 10% damage in green bolls.
k)    Insecticides such as quinalphos or thiodicarb may be used in early stages and synthetic pyrethroids after October at economic threshold levels of damage.
l)      Strictly avoid spraying pyrethroids before November or any insecticide mixtures at any time to prevent whitefly outbreaks.
m)  Select hybrids / varieties that are tolerant to sucking pests. This will help to avoid application of insecticides such as monocrotophos, acephate, thiomethoxam, acetamiprid, imidacloprid or clothianidin. Application of these insecticides, especially at the early stage of the crop results in growth of fresh green leaves, switching back from squaring-flowering to vegetative phase and delays maturity of the crop. Avoidance of these insecticides helps in  synchronous early maturity of bolls which helps in the escape of pink bollworm infestation.

POLICY INTERVENTION NEEDED
a)    Seed companies must ensure that Cry toxins are present in the hybrids in homozygous form, instead of the segregating heterozygous form as in the current hybrids.

b)    Recommendation for refuge in bag at 95:5 (Bt : NBt) seeds may partly help to decelerate the rate of development of bollworm resistance to Bt cotton. The non-Bt cotton seeds should be of the corresponding near-iosgenic hybrid.

 STEPS TAKEN BY ICAR-CICR
a)    Regular field surveys, pest monitoring and resistance monitoring studies are carried out under IRM programme.
b)    weekly advisories http://www.cicr.org.in/weekly_advisory.htm are issued in English and 8 local languages in the CICR web site. Advisories are issued regularly every Wednesday on the CICR website in English and nine regional languages, with mails and alerts sent to the State Agricultural Departments.
c)    Voice mail weekly advisories (E-Kapas) to 1,80,000 farmers across India and 11,893 farmers in Gujarat
d)    IRM (Insect Resistance Management) campaign through personal visits of CICR project staff and staff of Cotton Research station, Surat under the IRM dissemination programme in 150 field sites across Gujarat. 
e)    Front-Line demonstrations were conducted through the All India coordinated crop improvement project.

CONCLUSION

Insect resistance to toxins is a signal that is dangerous to ignore. The problem can only get worse over the ensuing years, if left unattended. The best way to mitigate the problem is to look for answers in the problem itself. Pink bollworm was a major problem in India 30 years ago, primarily because of long duration varieties and the absence of any potent control measures. The simplest and most potent way to overcome the problem is to take up timely sowing and cultivate early maturing short duration varieties of about 150 days duration. All other management strategies such as avoidance of excess urea + OP insecticides, use of light traps, pheromone traps, bio-pesticides, biological control etc., can rally around such varieties to minimize the damage to zero levels. I earnestly hope that the good collaborative efforts made in Gujarat this year by the Government and private agencies are replicated all across the country to ensure that cotton survives the worm and not vice-versa.